Loxeal Engineering Adhesives and Sealants
Retaining
Products
USE
Retaining anaerobic adhesives lock and fit bushes, bearings, sleeves, pin hubs, pulleys,
gears and other cylindrical components. They are ideal for increasing the strength of
press fir parts or retaining loose fitting parts, allow larger machining tolerances, reducing
manufacturing cocts, prevent fretting corrosion, vibration loosening and distortion.
Retaining adhesives have excellent chemical resistance and seal against most fluids.
MEDIUM STRENGTH LOCKING, EASY TO DISMANTLE WITH STANDARD TOOLS |
|
Medium strength anaerobic adhesive for retaining of bearings, liners, bushes, keys and splines. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. |
|
PERMANENT LOCKING |
|
High strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical components. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. |
|
High strength anaerobic adhesive for retaining of close fitted parts, shafts, bushes, pulleys, rotors. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. |
|
High strength anaerobic adhesive for retaining of close fitted parts, shafts, bushes, pulleys, rotors, expecially suitable to be used on oily surfaces as it is. Highly resistant to heat, corrosion, vibrations water, gases, oils, hydrocarbons and many chemicals. |
|
Fast curing high strength anaerobic adhesive for locking and sealing threads and retaining of cylindrical components. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals. |
|
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical components. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. Approved as thread sealant with gaseous oxygen up to 20 bar at 60°C (BAM Ref N° II.1/46 363). |
|
Fast curing high temperature resistant. High strength anaerobic adhesive for locking and sealing threaded connections and retaining of cylindrical parts. Medium thixotropic effect, allows larger machining tolerances. Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals. |
|
Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical parts. It allows larger machining tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals. |
|
Anaerobic and UV high strength retainer for metal cylindrical assemblies. Curing is effected in seconds by UV light and in few minutes between mating surfaces by anaerobic curing. Due to the fast cure avoid heavy press fits. The cured adhesive is a thermo set plastic suitable for exposure to most solvents and with stands temperatures up to 175° C. |
|
Very high temperature (+ 230°C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances. Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG – 5146BQ0496) |
|
A high viscosity gap filling silver paste used between machinery parts to repair worn areas and restore correct fits. It repairs worn shaft and housing, bearing spinouts, wallowed keyways and splines, threaded parts. Highly resistant to heat, vibrations, corrosion, water, gas, oil hydrocarbons many chemicals. |
|