Loxeal Engineering Adhesives and Sealants


Go to content

Pipe Sealing

Products

USE
Anaerobic threadsealing adhesives seal and lock threaded connections against pressure of gas,
air, water, oils, hydrocarbons and many chemicals. They replace hemp and P.T.F.E. tapes and
are available in various grades of locking strength with resistance to various chemicals.
Certified according to various international standards, e.g. DVGW, NSF, WRAS, KTW, BAM.

TECHNICAL INFORMATION

SIGILLAFILETTI

PERMANENT LOCKING

82-01

Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical components. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

83-50

Fast curing anaerobic adhesive for metals, with high mechanical resistance, designed to seal and lock threaded joints and cylindrical couplings.
Provides high resistance to temperature, vibration, chemical agents and aging. Highly resistant to unscrewing on yellow brass, nickel-plated and chromed fittings. Approved as threaded joints sealant for gas pipes under EN 751-1 (DIN DVGW nr. NG-5146BQ0134). Suitable for use with hot and cold potable water up to +85C (WRAS-approved material BS6920:2000). Positively tested by NSF Laboratoires, Michigan, USA, according to ANSI 61 for potable water contact.Keeps the sealing property until the temperature of +200 C for short periods.

83-58

High strength anaerobic adhesive for locking and sealing thread connections. Specifically developed to obtain maximum of torque strength on brass. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

85-21

Fast curing high strength anaerobic adhesive for locking and sealing threads, and retaining of cylindrical parts. It allows larger machining tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals. Approved for gas - Gaz de France.

85-86

Anaerobic adhesive for metals, high strength, to lock and seal threaded joints. Approved for use with drinking water according to TZW-DVGW approved for gas-tight threaded joints according to EN 751-1 (DIN DVGW approval no. 5146AR0573-NG).The product is certified (BAM-Berlin) for use as sealant in the presence of gaseous oxygen up to 20 bar at +60C.Can be used on all metals, both in free or forced matings.Maintains the sealing properties up to +200C.High resistance to thermal shock, vibration, water, gas, oils, fuels, refrigerant fluids and other chemicals.

85-90

High strength anaerobic adhesive for locking and sealing thread connections. Specifically designed to develop maximum of torque strength on brass threads. Keep sealing properties up to +250C. Highly resistant to heat, thermal shocks, corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals. High viscosity value allows superior working tolerances.

86-55

High strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

86-58

High strength anaerobic adhesive for locking and sealing fitted parts. Specifically planed to develop maximum torque strength on brass. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

MEDIUM STRENGTH-POSSIBLE TO DISMANTLE

53-14

Medium strength anaerobic adhesive for sealing hydraulic and pneumatic threads connectors up to and small pipes. To replace P.T.F.E. tapes in the sealing of gases, water, LPG, hydrocarbons, oils and other chemicals. Approved for Gas according to European norm EN 751-1 (DIN-DVGW NG-5146AU0038). Highly resistant to heat, corrosion, shocks and vibrations.

55-14

Medium strength anaerobic adhesive for sealing hydraulic and pneumatics threads connectors up to 1"1/2. To replace P.T.F.E. tapes in the sealing of gases, water, LPG, hydrocarbons, oils and other chemicals. Medium thixotropic effect prevents migration of the sealant before or during curing. Highly resistant to heat, corrosion, shocks and vibrations.

55-37

Medium strength anaerobic sealant for threads connectors up to 1"1/2. To be used in the sealing of gases, water, LPG, hydrocarbons, oils and other chemicals. Cured sealant forms elastic films highly resistant to vibrations and shocks. Retains sealant properties up to +150C. DIN-DVGW approved thread sealant for gas according to DIN EN 751-1 - Registration Number NG 5146AS0302.

56-03

Medium strength anaerobic adhesive for sealing hydraulic and pneumatics threads connectors up to 2". To replace P.T.F.E. tapes in the sealing of gases, water, LPG, hydrocarbons, oils and other chemicals. Medium thixotropic effect prevents migration of the sealant before or during curing. Highly resistant to heat, corrosion, shocks and vibrations.

58-10

Anaerobic curing adhesive for sealing of thread joints. It replaces PTFE tape and yarn and gives instant sealing against moderate pressure and flexible cured film. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration from thread of the sealant before or during curing. Shocks and vibrations resistant; unaffected sealing properties in the temperature range from -55C to +150C.

58-11

Anaerobic curing adhesive for sealing of metal thread joints. Approved for Gas ( DVGW, DIN-EN 751-1), high pressure gas and GLP (Australian Gas Association - Approval No. 5048) for working pressure up to 20 Bars. Approved for use with gaseous oxygen up to 10 Bars and +60C (BAM 1432/95 4-755). Approved for potable water (WRC). Instructions for use with potable water : apply product on male threads only, wait 24 hrs. after assembly. It replaces PTFE tape and yarn and gives instant sealing against moderate pressure. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration from thread of the sealant before or during curing. Shocks and vibrations resistant, unaffected sealing properties in the temperature range from -55C to +150C.

EASY TO DISMANTLE

15-36

Anaerobic sealant for thread connections allowing easy dismantling of parts. Upon curing will give an elastic film to replace yarn, P.T.F.E. tapes, and solid gaskets for the sealing of gas, air, water, LPG, oils, hydrocarbons and many chemicals. Shocks and vibrations resistant, will keep uneffected properties of sealing in the range of temperature from -50C to +180C. DIN-DVGW approved for gas connections according to : DIN 30661 class 1 - easy to dismantle - Reg. nr. 8701e632.

18-10

Anaerobic adhesive for sealing of metal thread pipe joints. Suitable for gas, LP gas, compressed air, gasoline and oil, industrial fluids, CFC, potable water and several chemicals. Low friction coefficient will assure easy assembly. Thixotropic property prevents migration from thread of the sealant before or during curing. It replaces P.T.F.E. tape and yarn. Cured product provides elastic film. Shocks and vibrations resistant; uneffected sealing properties in the temperature range from -55 to +150C. Easy dismantling is assured even after years. Approvals for natural gas and LP gas in vapour state
Europe : approved to EN751-1 by DIN-DVGW NG 5146AR0574 from -20C to +150 C up to 2 pipe size.

Australia : approved by AGA n.5047 up to 5 bar and 2 pipe size.

23-18

Low strength anaerobic adhesive for thread locking of nuts, bolts and screws of all types that require to be easily dismantled. Also to seal thread joint up to 3/4". Highly resistant to thermal shocks, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.


Back to content | Back to main menu