Loxeal Engineering Adhesives and Sealants
2-Components Adhesive
Products
USE
Two-part engineering adhesives provide high strength, structural joints. They are suitable for
bonding metals, ceramics, wood and some plastics and they are supplied in a pratical dual
cartridge dispenser. Curing occours upon mixing of the two components (resin and hardener).
Fixture time is from 5 - 10 minutes to several hours. Applying heat will accelerate the cure speed.
Temperature resistance is between - 30 °C and + 80 °C.
TWO PART EPOXY ADHESIVES |
|
Multipurpose, transparent structural adhesive, 90/150 minutes setting time. Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not indicated for rubber, soft materials, polyethylene, polypropylene and Teflon. Resistant to water, gasoline and oils. |
|
Multipurpose, transparent colourless structural adhesive, 20 minutes setting time. Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not suitable for soft materials, polyethylene, polypropylene and Teflon. Resistant to water, gasoline and oils. |
|
Multipurpose transparent colourless structural adhesive, 5 minutes setting time. Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not suitable for rubber, soft materials, polyethylene, polypropylene and Teflon. Resistant to water, gasoline and oils. |
|
Highly flexible structural adhesive with improved peeling adhesion and shock resistance, 30 minutes setting time. Recommended for bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, polycarbonate). Not indicated for polythene, PTFE and silicon. Resistant to water, gasoline and oils. |
|
Multipurpose, transparent colourless structural adhesive, with improved adhesion, 20 minutes setting time. Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not suitable for soft materials, polyetylene, polypropylene and teflon. Resistant to water, gasoline and oils. |
|
Multipurpose, transparent structural adhesive, 150 minutes setting time. Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not indicated for rubber, soft materials, polyethylene, polypropylene and Teflon. Resistant to water, gasoline and oils. |
|
SINGLE PART EPOXY ADHESIVES |
|
It is a single-part heat cured epoxy adhesive with excellent adhesion to metal surfaces as well as composite materials. the high bond strength of this adhesive allows it to replace mechanical fastening, soldering, brazing or welding. This material requires heat in the range between 150°C and 200°C to cure it. It has been designed to be non-sagging, allowing the product to be used in large gaps and on vertical surfaces. |
|